产品详情

出厂的每件产品都是精品

Imitation gasoline cutting machine



Product introduction
ne, safety and reliability of the product safety performance is better than acetylene and other gas,

 do not temper, don't sound explosion, oil tanks filled military explosion suppression material, can

control the explosion probability is zero. Oil tank exposed to high temperature fire, with oil repair

damaged oil tank, there is no explosion may.
Two, good cutting quality is convenient and flexible to use the product with the cutting, cutting,

slotting narrow flat, no scar, no incision on the edge of the lower edge of the undercut, slag amount,

simple cleaning. The product is small in size, light in weight and easy to carry. The whole product is

about 7kg, and the fuel can be purchased at any time.
Three, good economy, low cost miraculous saving of cutting plate is less than 20mm hourly fuel

consumption of 0.4 - 0.6 liters, 2.5 liters of gasoline cutting time and the current standard of a pot

of acetylene cutting at the same time, workload, energy-saving effect of more than 85%. Each of the

torch work one hour can save 25 yuan; welding and heating work saving effect is more prominent!


Four, cutting fast gas and acetylene cutting flame temperature is quite, up to 3100 degrees C - 3300

degrees C (adjustable). In the temperature 20 degrees C, using the product to cut 20mm steel plate,

preheating time 4S - 3S, cutting speed can reach 550mm/min.
Five, the application can be widely used to cut welding where oxygen acetylene flame welding, cutting

the workpiece, the product can be cut, welding and other processing. Welding process for welding below

5mm plate, brazing of various non-ferrous metals, such as tool making, stainless steel, cast iron,

copper, aluminum and other non-ferrous metals welding. At the same time, the product can also be fired

glass, molten metal, stone baked surface, preheat correction of the workpiece, cutting stainless steel,

cast iron, etc..


Six, green environmental protection, no pollution, no noise, no electricity, no heat, no remnant oil,

low cost, no harm to the operators, and operation method with acetylene cutting and welding torch

identical, operation personnel to adapt to the fast is acetylene pollution is the best way to solve!
Seven, the operation is simple and easy to learn, easy to operate, easy to master; fuel collection is

convenient, the use of fuel for gasoline stations, and 90#, 93#, 97# and ethanol gasoline effect.

Type
Cutting Thickness(mm)
Standard Equipment
Order NO.
QG4-30
1-30
A 30 type duplicating gasoline cutting torch,3 gasoline cutting nozzies,A 10L gasoline tank,10m flameproof oil-resistant rubber hose.
HS018
QG4-100
15-100
A 100 type duplicating gasoline cutting torch,3 gasoline cutting nozzies,A 10L gasoline tank,10m flameproof oil-resistant rubber hose.
HS019

 

在线客服
QQ客服:
点击这里给我发消息
QQ客服:
点击这里给我发消息
旺旺:
点击这里给我发消息

旺旺:
点击这里给我发消息